| |
PVC SHEET
TYPE 2, HIGH IMPACT
Skip to Prices
Vintec II®
is a high impact,
corrosion resistant polyvinyl chloride (PVC) sheet. Because of its excellent
impact and ductility it is ideally suited for applications that require
thermal forming or where the finished product is subject to shock or
physical abuse. Its high heat deflection temperature and high modulus make
it ideally suited for operation at temperatures up to 140oF. with
fewer supports than other Type II materials.
Key Benefits
- Conforms to ASTM D-1784-95
Class 16444-D (Formerly Type II Grade I)
- Manufactured with no
plasticizers or fillers
- Can be used in self
supporting construction up to 140oF
- Exceptional Fire Ratings
(UL-94V-0) and a flame spread under 20 per ASTM E-84
- Available in numerous
colors, finishes and sizes
- Good Impact
- Machinable
- Weldable
- High Compressive Strength
- Low Cost
Typical Properties
|
Property |
Units |
Value1 |
ASTM Method |
|
Density |
g/cm3 |
1.35 |
D 792 |
|
Water Absorption |
% |
0.16 |
D 570 |
|
Rockwell Hardness |
R Scale |
106 |
D 785 |
|
Shore Durometer |
D |
85 |
D 224 |
|
Cell Class |
-- |
16444-D |
D 1784 |
| Tensile
Modulus |
psi |
396,000 |
D 638 |
| Yield
Strength |
psi |
7,400 |
D 638 |
| Flexural
Modulus |
psi |
400,000 |
D 790 |
| Yield
Strength |
psi |
10,000 |
D 790 |
| Izod Impact |
ft-lb/in |
18 |
D 256 |
| Vicat
Softening Point |
oC/oF |
83/181 |
D 1525 |
| Heat
Deflection Temperature |
oC/oF |
82/179 |
D 648 |
| Heat
Deflection Temperature |
oC/oF |
80/176 |
D 648 |
| Linear
Coefficient of Expansion |
in/in/oC |
6.3 x 10-5 |
D 696 |
| Linear
Coefficient of Expansion |
in/in/oF |
3.5 x 10-5 |
D 696 |
| Flammability |
-- |
Self-Extinguishing |
D 635 |
| Flammability |
-- |
0 |
UL 94V |
| Flame Spread |
-- |
15 |
E 84 |
| Chemical
Resistance |
-- |
Class D |
D 1784 |
| Electrical
Volume Resistivity |
Ohm/cm |
6.0 x 1015 |
D 257 |
| Dielectric
Constant |
60 Hz |
3.03 |
D 150 |
| Dissipation
Factor |
60 Hz |
0.0083 |
D 150 |
| Loss Index |
60 Hz |
0.025 |
D 150 |
| Dielectric
Strength |
Volts/mil |
645 |
D 149 |
| Color |
Finish |
Thickness |
Width |
Length |
| Light Gray |
Smooth |
1/8" - 1" |
48" |
96" |
| Dark Gray |
Smooth |
1/8", 3/16",
1/4", 3/8" |
48" |
96" |
| Light Gray |
Matte |
1/8", 3/16",
1/4" |
48" |
96" |
| Dark Gray |
Matte |
1/8", 3/16",
1/4", 3/8" |
48" |
96" |
| White |
Smooth |
1/8" - 1/2" |
48" |
96" |
Warranty
All sheeting guaranteed void-free, the limit of our warranty is
your money refunded or defective material replaced; no other warranties are
expressed or implied.
1
Physical properties of plastic sheeting are represented as "Typical."
Information contained herein is considered accurate to the best of our
knowledge. It is offered for your consideration and investigation, and is
not to be construed as a representation or warranty expressed or implied.
Our warranties are limited to those expressly stated in formal contracts or
in conditions of sale on our invoices and order acceptances. Conditions and
methods of use may vary and are beyond the control of San Diego Plastics,
therefore, San Diego Plastics disclaims any liability incurred as a result
of the use of this product in accordance with the data contained in our
physical property charts. No information herein shall be construed as an
offer of indemnity for infringement or as a recommendation to use the
products in such a manner as to infringe any patent, domestic or foreign.
The "Typical" properties of our plastic sheet cannot be
automatically used when engineering finished components; and the fabricator
or end user is responsible for insuring the suitability of our products for
their specific application or end use! |
