PVC SHEET
Type 1, Normal Impact
Vintec I®
is a normal impact, high
corrosion resistant polyvinyl chloride (PVC) sheet. Because of its
exceptional corrosion resistance, it is ideally suited for applications
where maximum chemical resistance is necessary. Its high strength-to-weight
ratio, cost efficiency, ease of fabrication and eco-balance make it the
material of choice.
Key Benefits
-
Conforms to ASTM D-1784-95
Class 12454-B (Formerly Type I Grade I)
-
Manufactured with no
plasticizers or fillers
-
Can be used in self
supporting construction up to 140°F
-
Excellent Fire Ratings
(UL-94V-0) and a flame spread under 20 per ASTM E-84
-
Available in numerous
colors, finishes and sizes
Typical Properties
|
Property |
Units |
Value1 |
ASTM Method |
|
Density |
g/cm3 |
1.42 |
D 792 |
|
Water Absorption |
% |
0.06 |
D 570 |
|
Rockwell Hardness |
R Scale |
115 |
D 785 |
|
Shore Durometer |
D |
89 |
D 2240 |
|
Cell Class |
-- |
12454-B |
1784 |
| Tensile
Modulus |
psi |
411,000 |
D 638 |
| Yield
Strength |
psi |
7,500 |
D 638 |
| Flexural
Modulus |
psi |
481,000 |
D 790 |
| Yield
Strength |
psi |
12,800 |
D 790 |
| Izod Impact |
ft-lb/in |
1.0 |
D 256 |
| Vicat
Softening Point |
oC/oF |
83/181 |
D 1525 |
| Heat
Deflection Temperature |
oC/oF |
82/179 |
D 648 |
| Heat
Deflection Temperature |
oC/oF |
80/176 |
D 648 |
| Linear
Coefficient of Expansion |
in/in/oC |
5.8 x 10-5 |
D 696 |
| Linear
Coefficient of Expansion |
in/in/oF |
3.2 x 10-5 |
D 696 |
| Flammability |
-- |
Self-Extinguishing |
D 635 |
| Flammability |
-- |
0 |
UL 94V |
| Flame Spread |
-- |
15 |
E 84 |
| Chemical
Resistance |
-- |
Class B |
D 1784 |
| Electrical
Volume Resistivity |
Ohm/cm |
5.4 x 1015 |
D 257 |
| Dielectric
Constant |
60 Hz |
3.19 |
D 150 |
| Dissipation
Factor |
60 Hz |
0.0096 |
D 150 |
| Loss Index |
60 Hz |
0.030 |
D 150 |
| Dielectric
Strength |
Volts/mil |
544 |
D 149 |
| Color |
Finish |
Thickness |
Width |
Length |
| Dark
Gray |
Smooth |
1/16" - 4" |
48" |
96" |
|
1/4", 3/8", 1/2", 3/4", 1", 1 1/4", 1 1/2", 1 3/4", 2" |
48" |
120" |
|
1/4", 3/8", 1/2" |
60" |
120" |
|
White |
Smooth |
1/16" - 1" |
48" |
96" |
|
1/4" - 1/2" |
48" |
120" |
| White |
Matte |
1/8" - 1/2" |
48" |
96" |
| Dark Blue |
Smooth |
1/8", 1/4", 1/2" |
48" |
96" |
| Type
I Euro Gray |
Smooth |
1/8", 3/4", 1" |
48" |
96" |
|
1/4" |
48" |
100" |
|
1/2" |
51" |
122" |
| Type I Clear |
Smooth |
1/16", 1/8", 3/16", 1/4", 3/8", 1/2" |
48" |
96" |
Warranty
All sheeting guaranteed void-free, the limit of our warranty is
your money refunded or defective material replaced; no other warranties are
expressed or implied.
1 Physical properties of plastic sheeting are
represented as "Typical." Information contained herein is considered
accurate to the best of our knowledge. It is offered for your consideration
and investigation, and is not to be construed as a representation or
warranty expressed or implied. Our warranties are limited to those expressly
stated in formal contracts or in conditions of sale on our invoices and
order acceptances. Conditions and methods of use may vary and are beyond the
control of San Diego Plastics, therefore, San Diego Plastics disclaims any liability
incurred as a result of the use of this product in accordance with the data
contained in our physical property charts. No information herein shall be
construed as an offer of indemnity for infringement or as a recommendation
to use the products in such a manner as to infringe any patent, domestic or
foreign.
The "Typical" properties of our plastic sheet cannot be
automatically used when engineering finished components; and the fabricator
or end user is responsible for insuring the suitability of our products for
their specific application or end use!
|
|
