San Diego Plastics
2220 McKinley Avenue
National City  CA  91950
800/925-4855   619/477-4855   FAX 619/477-4874
Like us on Facebook! LIKE US ON FACEBOOK!   
PolyOne PolycastPolycast Acrylic Sheet  

Specialty Acrylic Sheeting

Polycast offers one of the largest selections of specialty cast acrylic sheeting in the industry. Our engineers are experienced at modifying acrylic sheet to change certain physical, chemical, or optical properties to meet the specific requirements of our customers. The following specialty products were developed to some of these particular applications.

Super Abrasion Resistant Acrylic Sheet (S-A-R)
Polycast S-A-R sheet has a surface with 45 times the abrasion resistance of uncoated acrylic.

Ex-Cell
This modified cell-cast acrylic sheet is designed for reduced chipping during routing and fabrication.

Colored Sheet
A large selection of colored acrylic sheet including our Fluoressence™ line of fluorescent sheet.

Bullet Resistant Sheet
Polycast manufactures acrylic sheeting listed by Underwriters Laboratories for Level 1, 2, and 3 arms.

Aerospace Grade Sheet
Polycast is an industry leader in the development and production of high quality sheet for both commercial and military aircraft.

Ultraviolet Transmitting Sheet
These specialty sheets transmit UV rays for use in constructing products like tanning beds and animal habitats.

Ultraviolet Filtering Sheet
UF grade sheet provides increased protection from UV wavelengths for building display cases for sensitive artwork and documents.

Infrared Transmitting Sheet - Poly 2711
A special formula that blocks all visible light, but allows infrared wavelengths to pass through. Specially suited for sophisticated security systems based on infrared technology.

Scintillator and Wavelength Shifter Sheet
Utilizes a special formula that produces visible light when bombarded with sub-atomic particles.

Pressurized Vehicle for Human Occupancy - PVHO
Polycast is the major supplier of acrylic sheet to the PVHO market. This highly critical application utilizes our expertise in producing optically superior sheet in thick sections.

Extra Thick Sheet
Sheet thicker than 4.500" is available as composite casting. The sheet is optically superior when viewed through the surface although polished edges may show the original casting surfaces as lines.

Close Tolerance Sheet
Polycast can manufacture sheet that maintains closer thickness tolerances than standard commercial grade sheet.

Textured Sheet
Sheet is available with a matte (GL-15) or non-glare (GL-99) finish, in clear and colors.

NSF Compliant Acrylic Sheet
A special formulation that meets the requirements of the National Sanitation Foundation (NSF) for food contact.

Preshrunk Sheet
Sheet that is thermally preshrunk, but does not met Mil-P-5425. Available in thicknesses of .060 to 4.250.

FDA Grade Acrylic Sheet
An acrylic sheet which complies with the Food and Drug Administration's regulations concerning food contact applications as described in 21 CFR 177.1010 for all food types, including alcoholic beverages in room temperature or refrigerated applications.

Request Quote / Informationbullet resistant panels

 

 

Polycast sheet has a high impact resistance that foils "smash and grab" thieves.
 

Hello?

Call today for complete product information!
800/925-4855
 619/477-4855
FAX 477-4874


                    SEND ME MORE POLYCAST SPECIALTY ACRYLIC INFORMATION

Mr. Necktie
Email:*            
Name:*             
Company*:          
Address:*          
City, State, Zip:* 
Country:           
Voice Phone:*      
Fax Phone:         
     
Note:*

*Required information
  Press to send your message.

Press to clear the form and start over.

 



Return
To MAIN

Site
Map
Search
Me
Return To
Linecard
Sales
Terms
Contact
Me