|
Click for Prices |
To Repair & Prepare Use NOVUS No. 3
Removes heavy scratches and abrasions from most
acrylic surfaces. Use when damage is too severe to be restored with
NOVUS No. 2 polish.
- Requires use of NOVUS No. 2 for final finishing
- Not recommended for use on coated plastics
|
 |
NOVUS No. 3
Removes Heavy Scratches from Most Acrylics
-
Remove surface dirt and dust with NOVUS No. 1.
-
Shake well. Test in an inconspicuous area.
-
Apply NOVUS No. 3 liberally. Using a clean, soft
cloth, polish with a firm back-and-forth motion at right angles to the
scratches. Keep the cloth saturated with polish at all times.
-
Continue polishing until only fine scratches
remain. Using cloth, remove all remaining polish, this is very
important!
-
Using a clean cloth, apply NOVUS No. 2 in a
circular motion uniformly to entire surface. Polish using light
pressure until NOVUS No. 2 dries to a light haze.
-
Using a clean portion of the cloth, buff the
surface clean. Follow with NOVUS No. 1 for best results.
|
Important Points to Remember - Before attempting to clean or
remove scratches, always make sure the plastic is cool to the touch.
Use a liberal amount of plastic cleaner to safely remove surface dust
and dirt. In addition, test scratch removers in a small or
inconspicuous area for compatibility. Some plastics are coated with a
thin film which may be damaged by the abrasives in the polish. NOVUS
No. 2 and No. 3 are not recommended for use on eyeglass lenses.
|
| |
|
|
