San Diego Plastics
2220 McKinley Avenue
National City  CA  91950
800/925-4855   619/477-4855   FAX 619/477-4874

Crystat®
(Anti-static Acrylonitrile-Butadiene-Styrene)
 

Semitransparent, inherently anti-static material available in roll stock and thin gauge sheet. Its strength and clarity make it excellent for thermoforming.

The following physical property information is based on typical values of the resin.

 
Mechanical Properties
  Units ASTM Test Result
Tensile Strength @yield psi D638 4,200
Tensile Elongation @break % D638 10.0
Flexural Strength psi D790 7,500
Flexural Modulus psi D790 225,000
Izod Impact Strength Notched ft·lbs/in D256 2.1
Izod Impact Strength Un-notched ft·lbs/in D256 -
Hardness-Shore D - D2240 -

 
Thermal Properties
  Units ASTM Test Result
Heat Deflection Temp. @264 psi °F D648 176
Heat Deflection Temp. @66 psi °F D648 -
Flam. Rating-UL94 - - -

 
Electrical Properties
  Units ASTM Test Result
Surface Resistivity dry ohm/sq D257 3 x 1011
Volume Resistivity dry ohm/cm D257 -
Static Decay 15% RH seconds Mil-B-81705-B -

 
Other Properties
  Units ASTM Test Result
Specific Gravity - D792 1.10
Water Absorption @24 hours % D570 -
 

 
Applications Include:
• Disk drive assembly fixtures
• Semiconductor/electronic components
• Electronic component transfer trays
• Telecommunications hardware
• Automotive equipment

 
Advantages of Crystat®:
• Good strength and stiffness
• Cost effective
• Easily machined
• Good chemical resistance
• Durable
• Bondable

Manufacturing Capabilities:
Rod: 1/8” to 4” diameter
Sheet: .030” to 4” thick
Film: .010” to .029” thick


 
*In addition to our standard capabilities, Westlake also has the ability to process custom resins in various sizes and colors with some exceptions.

See Also:
Absylux® CN-F
Absylux® CN-P
Absylux® SD-A


                    SEND ME MORE Crystat® INFORMATION

Mr. Necktie
Email:*            
Name:*             
Company*:          
Address:*          
City, State, Zip:* 
Country:           
Voice Phone:*      
Fax Phone:         
     
Note:*

*Required information
  Press to send your message.

Press to clear the form and start over.



Return
To MAIN

Site
Map
Search
Me
Return To
Linecard
Sales
Terms
Contact
Me