CPVC SHEET

CORZAN®⁽¹⁾CPVC is a high heat, corrosion resistant chlorinated polyvinyl chloride sheet (CPVC). Because of its excellent corrosion resistance at elevated temperatures, it is ideally suited for self-supporting constructions where high temperatures are a concern. It can be used (depending on chemistry) up to 210^oF.

 Key Benefits

• Conforms to ASTM D-1784-95 Class 23447-B (Formerly Type IV Grade 1)
• Manufactured with no plasticizers or fillers
• Can be used in self supporting construction up to 140^oF with fewer supports than other Type II sheet
• Excellent Fire Ratings (UL-94V-0) and a flame spread under 20 per ASTM E-84
• Available in numerous colors, finishes and sizes

• Good Impact
• Retains Physical properties at elevated temperatures
• Machinable
• Weldable
• High Compressive Strength
• Low Cost

Typical Properties

⁽¹⁾    Corzan® in a registered trademark of Noveon, Inc.

Warranty
    All sheeting guaranteed void-free, the limit of our warranty is your money refunded or defective material replaced; no other warranties are expressed or implied.
¹ Physical properties of plastic sheeting are represented as "Typical." Information contained herein is considered accurate to the best of our knowledge. It is offered for your consideration and investigation, and is not to be construed as a representation or warranty expressed or implied. Our warranties are limited to those expressly stated in formal contracts or in conditions of sale on our invoices and order acceptances. Conditions and methods of use may vary and are beyond the control of San Diego Plastics, therefore, San Diego Plastics disclaims any liability incurred as a result of the use of this product in accordance with the data contained in our physical property charts. No information herein shall be construed as an offer of indemnity for infringement or as a recommendation to use the products in such a manner as to infringe any patent, domestic or foreign.
    The "Typical" properties of our plastic sheet cannot be automatically used when engineering finished components; and the fabricator or end user is responsible for insuring the suitability of our products for their specific application or end use!