Absylux® CN-P
(Conductive Acrylonitrile-Butadiene-Styrene))
|
|
Carbon-powder-filled conductive
material with high strength and stiffness, and relatively high
impact strength. This material is easily machined and fabricated
into close tolerance finished parts.
The following physical property
information is based on typical values of the resin.
|
|
Mechanical Properties |
| |
Units |
ASTM Test |
Result |
| Tensile Strength @yeild |
psi |
D638 |
4,000 |
| Tensile Elongation @break |
% |
D638 |
11.0 |
| Flexural Strength |
psi |
D790 |
7,200 |
| Flexural Modulus |
psi |
D790 |
280,000 |
| Izod Impact Strength Notched |
ft·lbs/in |
D256 |
1.0 |
| Izod Impact Strength Un-notched |
ft·lbs/in |
D256 |
13.5 |
| Hardness-Shore D |
- |
D2240 |
- |
|
|
Thermal Properties |
| |
Units |
ASTM Test |
Result |
| Heat Deflection Temp. @264 psi |
°F |
D648 |
185 |
| Heat Deflection Temp. @66 psi |
°F |
D648 |
- |
| Flam. Rating-UL94 |
- |
- |
HB |
|
|
Electrical Properties |
| |
Units |
ASTM Test |
Result |
| Surface Resistivty dry |
ohm/sq |
D257 |
102 - 106 |
| Volume Resistivity dry |
ohm/cm |
D257 |
102 - 106 |
| Static Decay 15% RH |
seconds |
Mil-B-81705-B |
<0.1 |
|
|
Other Properties |
| |
Units |
ASTM Test |
Result |
| Specific Gravity |
- |
D792 |
1.03 |
| Water Absorption @24 hours |
% |
D570 |
0.30 |
|
|
| Applications
Include: |
| • Disk drive assembly fixtures |
| • Semiconductor/electronic
components |
| • Electronic component transfer
trays |
| • Telecommunications hardware |
| • Automotive equipment |
| Advantages of
Absylux® CN-P: |
| • Good strength and stiffness |
| • Cost effective |
| • Easily machined |
| • Good chemical resistance |
| • Durable |
| • Bondable |
| Manufacturing
Capabilities: |
| Rod: 1/8” to 4” diameter |
| Sheet: .030” to 4” thick |
| Film: .010” to .029” thick |
| *In addition to our standard
capabilities, Westlake also has the ability to process custom
resins in various sizes and colors with some exceptions. |
|